Fujimi 1/700 Special Series No.7 Japanese Navy Heavy Cruiser Myoko Plastic Model Kit

You can choose from the beginning of 16 to 199. Introducing new parts. Products are unpainted kits that require glue assembly and painting. The scale is 1/700, and the bottom of the ship is not included. This product is composed of traditional (special series) molds and new additional mold parts. The heavy cruiser ship "Mikaka type" is a heavy cruiser ship designed and built under the Washington army contract, and 4 warfare including Nachi, Hashimi, Hakuro, and Hakuro. The Yokosuka Navy Koyaku was equipped with 5 7.9 inch (20 cm) round guns and 4 3-series torpedo launchers, and a fighter model with a balance of running protection. 2 renewations were performed before the opening of the Pacific War, the main gun renewed to 20.3 cm and the drain capacity was 13,000 ton and 33.8 knots by an 132,830 horsepower organization. After the opening of the war, he participated in the Southern Attack operations and support and the main fleet operations including the Coral Sea, the Midway Battle and the Mariana. It was a thunder and back to Cologne in October 19, and aimed to be an inner repair, but due to thundering a submarine, it became unable to sail due to thundering a submarine, and was hooked up to the Hakoku and mored as an air protection gun at Singapore/Selter army Port and was recruited by the British army after the sea. This product can be made from the first warp "Mikoka" in the opening of the war (from 16th 16), Mariana Battle Time (18th to 19), and the Laite (October 19). In 196/during the war opening, the upper glance area is small, and the sides of the kantbridge are equipped with a 0.5 inch (13 mm) consecutive aircraft gun. In 18 and later / during the fight of Mariana, it is equipped with a No. 21 electrolytic exporsion, a 1.0-inch (25 mm) consecutive aircraft gun, an air defense command and and a windshielding device. It features No. 13/22 electric detection, 25 mm 3 round aircraft guns and single-body guns. A new mold was used to unify the differences in the reproduction of the equipment and other parts of the product due to the launch of the product, and the partitions were also taken into consideration of the painting process. The No. 13 electrical search is a new enclosed part with a sculpted expression in the truss structure, and the air line part also has a shape representation of the shape. The No. 21 electrical search is a more delicate sculpture than conventional included parts, such as the insulator base for securing the elements on the front. The No. 22 electrical search has been made into parts that have been opened using a slide mold. The A1 Kai 1 1/2-inch (12.7 cm) consecutively mounted high angle gun subdivided into all 5 parts, increasing the resolution of the modeling from the 2 parts of the existing product. The 9.2 yd (9 m) cutter has been made into 2 parts for painting. The mount is equipped with separate parts and can be selected with a solid mold on the top. The 11 meter internal volcanopy, considering the painting of this product, the canvas and the shipper/machine canopy are made in separate parts. Each coat is applied and assembled and bonded to a later period of time. The 12-meter inner lunch can also be represented without canvas. The aircraft cradle is made with a mold that has uneven shapes and light holes, making it more precise to the model. Comes with new parts for the chrysanthemum crest of the ship neck and the fender lights on the side of the kleash. Special parts include lifesaving indicators on the side of the fleet and bridge. Parts that were first released have been changed to the standard parts in recent years. 43.3 inches (110 cm) detection light and 23.6 inches (60 cm) signal detector are enclosed in common parts. The Kureki No. 5 injection machine contains parts that utilize a slide mold. Additional binocular telescope parts are added to the air defense command and and compass. Includes decals for the Kantail ship name (warship color painted mushy tone) and the mast white line. The 96 model 25 mm gun has been made to standard specifications with 2 parts that reduce painting and painting division. Hull The hull is a 1-piece construction that is molded together with the left and right sideward for a more stable structure compared to the left and right adhesive type. The bulge is characterized by the shape of the fender, and is represented as an integral part of the hull. The fender window is in the state of the opening of the war, and the fender outline is reproduced with an integral sculpture on the hull. Each deck The upper deck is a one-piece part, the front and shelter deck are separate parts, and the second half is integrated with the fleel. Recreates a variety of models such as the mounting parts of a machine gun ammo box, mono gun and hose reel. The shelter deck has been made in separate parts, and the torpedo equipment compartment on the lower layer. Kantashi Mast The characteristic curved surface of the klebridge base is made 3D by combining the front and side parts. The overnight hall / air defense control station has special parts to reproduce the annual difference. Each layer deck including a compass Kanbridge and lower view herry, is detailed with a stackable construction. The front mast has been reproduced in 2 revised forms during the opening and after the war is opened using special parts. Main turret / chimney The main barrel is fixed to the turret and the turret can be rotated by incorporating polycaps. The hood of the 2nd and 4th turret is enclosed with special parts to recreate the final look. Both front and rear chimneys are split left and right to show handrails, double scaffolding and steam disposal pipes in one piece. Rear Mast Aviation Rigging The rear mast consists of 3 parts divided into the top and bottom of the cross tree. The water connaissance crane has been replaced with a hoist crane type. The aviation work deck is carved with linoleum-filled press metal. Fleet aircraft In order to improve workability (prevent damage during gate cutting), the molded color is gray. Comes with 2 each of the 95 water connaissance, a Zero (3 seat) water connaissance and a Zero water observation. It can reproduce the situation of the installation of 2 “95” water reconnants and 1 Zero water reconnaissance machine in 16–17. It can reproduce the installation of 2 zero-type water observation machines and 1 zero-type water connaissance machine in 197. Included decals Marking items such as military ship flags, flags, and the Hinamaru of the aircraft are included. ・We have 3 sizes of military ship flags, etc. Actual dimensions of 10 width, 6 width, and 3 width are 1/700 scale. It includes the Hinomaru of the ship aircraft and the corresponding yellow belt (yellow band), and the Hinomaru includes those that do not have the white border during the late of the War. A decal containing the mast white line and the ship name (two types of gold and warship color filled). Included Accessories: Runner x 28 Assembly instructions x 1 Decal x 2 This product is manufactured in Japan. This product is a plastic model kit that requires assembly.

• Plastic model
• Scale: 1/700