5Pcs T Slot Router Bit Set,1/4" Shank,Cutting Height 1/8",5/32",3/16",1/4" and 5/8",3/8" Deep T Trark Bit with Bearing,T-Slotting Cutter for Plywood Slotting,Grooving,Rebating

Complete with an arbor, bearing and clean-cutting 2-wing cutter to quickly cut 3/8"(9.5mm)-deep slots and grooves. A 1/2" diameter bearing is supplied with every cutter,depth of cut can be changed by purchasing alternative bearing sizes.With Φ16mm bearing,get 5/16"(7.9mm)-deep slots;With Φ19mm bearing,get 1/4"(6.3mm)-deep slots;With Φ22mm bearing,get 3/16"(4.8mm)-deep slots;With Φ19mm bearing,get 1/8"(3.2mm)-deep slots.NOTE: 1.A little rust preventive oil deposits on the sandblasted surface (looks a little dirty),is normal and doesn't affect the usage. Absolutely guaranteed to be a good quality new bits!2.Insert the cutter shanks into the collets as deep as possible,leave 3mm or less shank showing. 3.Before the product is received for using, check the drill bit for cracks or chips,we provide perfect after-sales service.4.Trial cuts should be made on waste material before starting any project.SAFETY INSTRUCTIONS:1.Always wear dust protection mask,eye protection in the form of goggles, safety spectacles or a visor.2.Make sure use on a router machine for which the product is applicable.3.Please make sure that the Router Bits and router table connections is tight,void loosening and causing it to throw out !!!4.Before each use check that the cutting tool is sharp and free from damage.

• 🔨 Akylin T-Slotting Cutter Set, 1/4" shank,cutting height 1/8",5/32",3/16",1/4" and 5/8",1-1/4" cutting diameter to create 3/8"-deep slots and grooves. Application: Producing T slots and grooves in any wood,especially perfect for plywood
• 🔨Ball bearing T trark bits build T-moldings, spline joints, tongue & groove joints, and other applications. A 1/2" diameter bearing is supplied with every cutter,depth of cut can be changed by purchasing alternative bearing sizes.
• 🔨Tungsten carbide-K10 original carbide tipped,with minimal wear and longer life.Silver induction brazing for maximum strength and durability.Heat resistant coating will provide the router bits with superior wear resistance and Rust and corrosion prevention
• 🔨1/4" shank made by solid steel,lower vibration for the bigger cutter and added stability.Bearing guide ensures perfect guidance and smooth running,reduce trimming mishaps,largely reduces chipping
• 🔨To rout hardwood, softwood, plywood or composites.Use in hand-held, table-mounted.MAX RPM 16 000